Pneumatic ball valve

Pneumatic ball valve
Pneumatic ball valve
Pneumatic ball valve
Pneumatic ball valve
Pneumatic ball valve
Pneumatic ball valve

Pneumatic ball valve

Describe

(1)Material: UPVC, CPVC
(2) Size: 1/"-4", DN15-DN100, dn20-dn110 (3) Standard: ANSI, DIN
(4)Connection: socket
(5) Working pressure: 150PSI, 1.0MPa
(6) Operating temperature: UPVC (-10°C-60C), CPVC (-10C-90C)
(7) Minimum air pressure: 45PSI, 0.4MPa
(8) Body color: UPVC (dark gray) CPVC (light gray)

Share:
Description

Actuator working mode double-acting/single-acting (NC normally closed, NO normally open)
Specification 20 25 32 40 50 63 75 90 110
1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 4"
Control stress 4~8
NAMUR standard air source interface G1/4"
Double acting actuator model AT52D AT52D A63D AT63D T75D AT83D AT92D AT105D AT125D
Single acting actuator model AT52s AT63s AT63s AT75s AT75s AT83s AT92s AT105s AT125s

 

Advantage

(1) The actuator has passed the impact test, acid and alkali test, and the material complies with SGS
(2) Valve opening 0°-90°
(3) The connection between the actuator and the valve complies with ISO5211 standard
(4) 100% performance test of valve before leaving factory
(5) The cylinder body is made of extruded aluminum alloy, and the inner hole and outer surface are hard anodized for longer service life and low friction coefficient.
(6) Integrated design. All double-acting and single-acting actuator models have the same cylinder body and end cover. It is easy to change the mode of action by installing and removing the spring.
(7) The air source interface complies with NAMUR standards and can be directly installed with NAMUR standard solenoid valves.